No master light business must read – how to give home improvement customers to do a plan drawing

No master light business must read – how to give home improvement customers to do a plan drawing

With the growing volume of non-master lights, service dealers are trying to improve their professionalism to serve owners. However, for a variety of reasons, dealers often ask how to draw a good home lighting drawings.

There are also cattle dealers said, do not draw pictures can also sell lights ah, yes, do not draw pictures can sell lights, customers want to sell what, but, as long as there is a problem, customers will say that the lamp is a problem. For example, the Angle suggested by the decoration company is wrong, all are big spots, the customer must say that your light is not good; The position of the lamp did not open the hole, did not shine the position, it is also said that your light is not good; The color temperature is wrong, I don’t like it, it is also said that your light is not good. Everything can be blamed on the lights anyway.

In order to avoid these problems, most businesses have provided lighting solution services, and the selection drawing list is available to avoid problems as much as possible.

Today, let’s talk about how to draw a good home lighting drawings.

We often get home decoration drawings, can be said to be varied.

It’s all stacked in the model like this.

There are also very standardized in the layout.

In fact, after reading more drawings, we try to learn this kind of standardized drawings.

Before drawing our own drawings, we have to have our own set of norms, big companies have the norms of big companies, small companies have the norms of small companies, and we have our own norms, but we can’t do without norms.

First of all, the commonly used layers, lamps in different positions, numbering, size standards, loops, etc., should be divided into layers, and the good habit of maintaining component layers.

The second is the lighting legend, do a lighting legend set with its own characteristics, do not take the decoration company’s legend directly set, because you will find that the decoration company’s legend even the types of lamps are not complete.

Then, you have to improvise to draw some legends of unpopular lamps, such as the one below.

There should be different proportions of the annotation style, so that the standard of different sizes of drawings can be clearly seen in the layout.

With these preparations in place, you can begin to draw.

The biggest feature of the lighting drawings is that we do not need to repeat the drawing of the architectural space and furniture, but we must sort out the drawings.

We must first arrange and correspond the floor plan and ceiling map respectively, and this step can be omitted in the standardized drawings, because the standardized drawings are spent in the same model, and it is OK to copy them.

The finished plane ceiling corresponding map should be very clean and clear, the plane is in one layer, the ceiling is in one layer, and the color is different base color, which is convenient to distinguish.

The purpose of this drawing is to facilitate our arrangement of lamps in the ceiling to correspond to the position of the plane, and the biggest feature of our lighting is that where needs to be illuminated, rather than randomly arranged in the sky.

Then, we can begin to draw the light position on the drawing, and the drawing light position is a continuous process of copying and copying, constantly copying the corresponding lamp legend to the corresponding position, and using the auxiliary line to determine the position.

After drawing and numbering, it basically looks like the picture above.

At this point, our main work is complete, and the rest is very detailed auxiliary work.

We want to make the drawing into a suitable for the customer to see, but also suitable for the site construction of a thing, and can be based on the drawing list quotation, we need to have a lamp ceiling plane map, this is to show the customer and can be explained. The picture above is fine. Let’s put a frame around it.

The frame is everywhere, find one you like, scale it to A3 size in the layout, set up a viewport, scale the drawing to your scale in the viewport, here we used the viewport scale is 1:100.

Then it is the size positioning of the lamps, because you need to facilitate the opening of the scene, and mark the size of all the lamps.

Then there is the corresponding figure of the lamp belt, because the lamp belt is long and short, every place we have to mark it, and attach the power supply, so as to facilitate the field cutting the lamp belt and accurately placing the power supply.

You want to let the electrician know your scene control, so you have to mark a lamp circuit, this circuit is marked in a variety of ways, can make the scene understand the line.

With these drawings, your project on a few books can be done, if it involves intelligent control, but also need intelligent control drawings, this we do not talk about today.

If you want to do better and more complete, you can also do a separate project drawing cover, make a catalog, and then add a design description, here we will not show.

Of course, there are many kinds of drawing methods, here I only show my accustomed drawing methods, you can also refer to the drawing methods of other teachers.

from Shao Wentao – Bottle sir Light